Spectrophotometer cuvettes, VWR®

Supplier: VWR, part of Avantor
VWRU414004-068EA 0 EUR
VWRU414004-065 VWRU414004-051 VWRU414004-068 VWRU414004-069 VWRU414004-055 VWRU414004-059 VWRU414004-073 VWRU414004-060 VWRU414004-062 VWRU414004-070 VWRU414004-052 VWRU414004-078 VWRU414004-053
Spectrophotometer cuvettes, VWR®
Cuvettes Spectrophotometer Cuvettes
Cuvettes manufactured from Spectrosil quartz for accurate readings over the entire UV range to near infrared range. Due to the fully heat-fused construction (no intermediate materials or adhesives) and careful annealing to remove any strain, there is no optical or physical distortion of the two optically polished windows.

  • Far UV quartz
  • Wavelength range of 170 to 2700 nm
  • Matched sets available
  • Fully heat-fused construction

In semi-micro cuvettes, the walls parallel to the light path are thickened, decreasing the sample chamber width to 4 mm.

Sub-micro cuvettes have a Z dimension that must be matched between the cell and the instrument to be used.

Three cover types are available: Flat lid, stopper, and screw cap. Flat lids and stoppers are made of polytetrafluoroethylene (PTFE). Stoppered cells feature a block fused to the top of the cell with a ground hole for the stopper, providing a more suitable seal for volatile liquids. Cells with screw caps can be used under anaerobic conditions and offer an air-tight fit. Cell 414004-054 features a closed-top polymer screw cap with a silicone rubber gasket. Cell 414004-055 features an open-top polymer screw cap with a silicone rubber septum.

Delivery information: Supplied with three cover types: Flat lid, stopper and screw cap − Flat lids and stoppers are made of PTFE.
Order Now

Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Learn more About VWR